5 Maintenance and Repair
42
Brush mower
agria 8000
Blade replacement
1 Blade screw
2 Nut
3 Blades
4 Lock washer
5 Blade damping washer
Switch off the engine
Pull off the sparking-plug connector
Wear protective gloves
•
Unscrew nut (F/2) and remove washer (F/4).
•
While pulling out the screw (F/1), hold the
blade (F/3); then pull out the screw all the
way down through the mounting hole of the
lower disc.
•
Remove, rotate the blade and reinsert it, or
insert a new blade.
•
The blade has cutting edges on both sides.
The blunt blade can be reground and slight
bends straightened. Replace severely dam-
aged or bent blades by new ones.
•
Check screw (F/1) for wear and replace it by
a new one if necessary.
•
The assembly is carried out in reverse order.
•
Replace the lock washer (F/4) by a new one
- on some mowers the nut is secured by a
cotter pin, use a new cotter pin here.
Do not use the mower when the blades
are not fully inserted!
For all spare parts, use the manufacturer's
original version.
Wear protective goggles and gloves
when resharpening the mower blades!
Summary of Contents for 8000
