40
agria
Multi-Purpose Machine 400E/400K
Ridging unit
Required accessories:
1 Linkage ............... Item no. 0440 111
1 Ridger ................. Item no. 0252 011
Optional:
1 Pair of strake wheels .......................
............................... Item no. 0120 011
Assembly:
l
Remove add-on sets of blades, if
equipped.
l
Take both sets of blades (8+10)
pointing outwards and remove them
from both ends of the rotor shaft. Swap
sides and fit each set again on the other
shaft end. Blades point inwards (as de-
picted below). The hoeing width is now
36 cm, and there is no need to fit extra
sets of blades.
l
Fit the guard discs.
l
Remove the depth bar. To do this, fit
the coupling unit (13) instead.
l
Insert the ridger stem (1) into the
pocket of the beam, insert U-pin (2) as
depicted and secure with spring clip (3).
l
Set the angle of the ridger (1) with
hex bolt (5). After setting the desired
ridging depth (1), bolt the ridger down
with hex bolt (4).
Strake wheels
For full tractive power or improved ridg-
ing in cultivated soil, strake wheels (Ac-
cessory no. 0120 011) (16) can be used
instead of blade sets.
The strake wheels are fitted, like the
blades, by inserting hex bolts into
borings of hub and shaft.
Ridging
To use the machine for ridging, proceed
as described in chapter “Hoeing”.
l
You readjust the ridging depth by
adjusting the ridger’s angle. For this pur-
pose, turn the set screw (5) or the slade
(15) and clamp screw (14).
l
Adjust the desired ridging width by
adjusting the mouldboards (7) and the
clamp screw (6).
l
The angle through which the ridger
moves is set with the set screws (11)
and lock nuts, according to require-
ments.
3. Devices and Operating Elements
1 Ridger
2 U-pin
3 Spring clip
4 Clamp bolt for ridger
5 Set screw for ridging
depth
6 Clamp screw for
adjusting ridging width
7 Mouldboard
8 Blade
9 Fastening screw for
blades
10 Blade
11 Set screw for
swinging buffer
12 Pin
13 Linkage
14 Clamp screw for slade
15 Slade
16 Strake wheels
3
4
Summary of Contents for 400E
