Agria 400E, Operating Instructions Manual

Page: 36 / 68

36 agria Multi-Purpose Machine 400E/400K
3. Devices and Operating Elements
Rear Attachments
Most rear attachments are linked to the
clevis with a pin (7) (accessory).
The coupling unit (3) is inserted into the
rectangular tube (1) underneath the V-
belt guard.
Insert square pins (3) into rectangular
tube (1) to a stop and lock with a linch
pin (2).
The angle through which some attach-
ments, like the depth bar or the plough,
pivot is set by adjusting screws (6) and
lock nuts (5), according to requirements.
Hitching Device
The hitching device (1) (optional) is an
adapter placed between the drawbar
coupling and the attachments (plough,
cultivator etc.). These attachments are
placed with their connecting yoke into
the connecting collar (2) , fixed down
using the connecting pin (3) which is
then secured with a spring clip (4) .
The working height with the hitching
device may be individually adjusted by
using the crank (5) .
The amount of movement "play X" may
be changed using the adjusting screws
(6 and 7) . In this way the steering pat-
tern may be individually adjusted for
each attachment.
1 Rectangular tube
2 Linch pin
3 Square pin
4 W-clip
5 Lock nut
6 Set screw
1 Hitching device
(optional 0440 021)
2 Connecting collar
3 Connecting pin
4 Spring clip
5 Crank
3