agria
Multi-Purpose Machine 400E/400K
35
l
Move the basic machine to the at-
tachment. Hook the machine up to the
pin (e) on the attachment.
l
Couple the attachment with
tensioning devices:
1.
Move both tensioning levers (a) to
the rear,
2.
until tensioning bands (b) lock into
the slots of the attachment
linkage,
3.
move both tensioning levers back
to the front to a stop.
l
Move the stand (c) back up and lock.
It will be easier to move the springs of
the tension levers back to their original
position, if the wheels are in position
“NEUTRAL” (see chapter “Wheel drive”
on page 27)
Decoupling
To decouple the attachment reverse the
above process.
Fit the cap onto the pto shaft of the ba-
sic machine.
W
Warning!
Only drive pto-driven attach-
ments at speed “I” (slow).
Only operate attachments only with
all guards in place.
Observe the operating instructions of
the respective attachments!
3. Devices and Operating Elements
3
a Tensioning lever
b Tensioning band
c Stand
d Linkage
e Linkage pin
f Cap
Summary of Contents for 400E
