Agria 400E, Operating Instructions Manual

Page: 39 / 68

agria Multi-Purpose Machine 400E/400K 39
Depth bar
There are two depth bar versions avail-
able:
l
Standard depth bar (adjustable bar),
l
Wheel depth bar (support wheels).
The depth bar is fitted on the coupling
unit. The support wheels are to ensure
an easier transport of the machine.
Fitting the depth bar
l
To fit the standard depth bar, insert
the bar unit into the rectangular tube
designed for coupling rear attachments.
Secure with linch pin.
l
To fit the wheel depth bar, first fit the
wheel axle (1) onto square bolt.
The machine’s forward movement is
slowed down by the depth bar.
The proper cultivating depth is control-
led by pushing the depth bar (5) down
into the soil. The deeper the depth bar
is pushed into the soil, the slower is the
machine’s forward movement and the
blades will cultivate the soil at a greater
depth.
Depth setting:
deep for heavy, hard soil
high light, loose soil
To work on sandy soils turn the depth
bar upside down for the angled end to
point down and backwards.
Setting the depth bar:
l
Loosen clamp screw (22), push the
depth bar to the desired position and
retighten clamp screw.
l
For the coupling unit version, you can
adjust the bar’s pivoting angle with the
set screws (14) and lock nuts (13), de-
pending on requirements.
Wheel depth bar
3. Devices and Operating Elements
Standard depth bar
3
1 Wheel axle
2 Standard depth bar
unit
5 Depth bar
10 Coupling unit
11 Linch pin
12 W-clip
13 Lock nut
14 Set screw
15 Pin
17 Wheel depth bar
mounting unit
18 U-pin
20 W-clip
21 Clamp screw for
ridger
22 Clamp screw