Agria 400E, Operating Instructions Manual

Page: 31 / 68

agria Multi-Purpose Machine 400E/400K 31
3. Devices and Operating Elements
Pto drive
Type 400E
Switching on the pto:
Move the pto lever (A/1) clockwise until it locks.
Switching off the pto:
Move the pto lever anti-clockwise until it locks.
Type 400K
Switching on the pto:
Move the pto lever (E/6) to the rear and up to a
stop.
Switching off the pto:
Move the pto lever to the front and down.
I
If it is not possible to move the pto lever
(selector sleeve can-not lock into drive
shaft pin), then shortly lift the hand clutch lever
(E/4 or G/4) all the way to reverse while mov-
ing the pto lever. To do this, the engine has to
be in neutral (not full throttle).
Stand on Type 400K
The 400K model is equipped with a stand on
the basic machine, which allows the machine
to be parked more easily after the attachment
has been decoupled.
To do this, push on the stand from the right
side and push it down. Take the force off and
move the stand further down until it locks.
To fold the stand up, reverse the above proc-
ess.
Note: Before you take up operation, fold up the
stand.
Type 400E
Type 400K
Stand
3