8
FIGURE 17
FIGURE 18
28. Slide the handle grip (29) onto the end of the handle
TUBE ASSHOWNINÚGURE
29. Assemble the handle tube (9) to the dump tube (5)
and secure in place with a 1/4" x 1" curved head bolt
ANDNYLOCKNUT 3EEÚGURE
30. Snap the dump handle clip (33) onto the pivot rod.
31. To attach the hopper bag to the sweeper, slide the
pivot rod into the pivot rod retainers on the ends of
the bag arm channels. The channels go on the inside
OFTHEBAGTUBES3EEÚGURE
HINT:
Temporarily loosen the plastic wing nuts (31) if
NECESSARYTOÚTTHECHANNELSINSIDETHEBAG
31
29
9
26
24
33
ATTACHING SWEEPER HITCH TO TRACTOR
1.
0LACETHETRACTORANDSWEEPERONAÛATLEVELSURFACE
2. Set the sweeper height adjustment handle to about
the middle of its adjustment range.
3. Attach the sweeper hitch to the tractor hitch, making
adjustments to the hitch brackets depending on the
drawbar height of your tractor as shown in GROUP A,
'2/50"AND'2/50#DIAGRAMSINÚGURE
APPROXIMATELY LEVEL
(6" to 8" FROM SURFACE)
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
FIGURE 19
GROUP "B" VEHICLES
WITH HITCHES
HAVING 9" TO 11"
GROUND CLEARANCE.
GROUP "A" VEHICLES
WITH HITCHES
HAVING 11" TO 13"
GROUND CLEARANCE.
GROUP "C" VEHICLES
WITH HITCHES
HAVING 7" TO 9"
GROUND CLEARANCE.
FIGURE 20
4. Arrange the spacers into one of the three possible
combinations as shown below in the GROUP A,
'2/50"AND'2/50#DIAGRAMSINÚGURE
IMPORTANT:
To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
APPROXIMATELYLEVELWITHTHEGROUNDASSHOWNINÚGURE
