6
FIGURE 12
21. Turn cart right side up, so that it rests on its
wheels.
22. Place front panel in guides to complete assembly.
23. Your cart is now ready to use.
MAINTENANCE
1. Grease or oil wheel bearings occasionally. Use
automotive wheel bearing type grease or 20 weight
oil.
2. Periodically retighten all screws, especially after
heavy use.
Do not exceed load capacity rating
of 300 lbs.
3. Clean cart thoroughly after each use.
4. Store indoors during severe weather.
5. Apply light coat of varnish to all wood surfaces
annually.
6. Use glossy black enamel spray paint to touch up
scratched or worn painted metal surfaces.
If cotter pin can not be assembled through
hole in the axle ends, remove one washer
from inside, next to axle sleeve.
NOTE
20. Place one 1-1/2" dia. flat washer on the axle, then
a wheel and then one more 1-1/2" dia. flat washer.
Secure wheel to axle with a cotter pin. See figure
12 and note below. Repeat step for other wheel.
