17
17 di 56
© AGREX S.p.A.
Computer PFI - Operator Manual
W
arning
daTa
OBTainEd
dUring
OPEraTiOn
Can BE USEd
FOr FLOW
CaLLiBraTiOn.
dO YOU WanT
TO PrOCEEd?
COMMANDS
•
The buttons alongside the and icons increase or decrease respectively the amount of
fertilizer to be spread per hectare with respect to the nominal value set in the job.
•
The button alongside the icon resets gate opening to the nominal value as set in the job.
7. STOP/CALIBRATION
DISPLAY
•
The STOP icon (
) appears when spreading has begun (see point 8 below).
•
After distributing a set amount of fertilizer, a message appears asking for calibration to be
performed. The (
) icon alternates with the
icon to indicate that the flow can be
calibrated.
See the section on Work Preferences in Advanced Settings for further details on setting the amount of
fertilizer to be spread before a message appears asking for flow calibration to be performed.
COMMANDS
•
The button alongside the icon
stops spreading and ends the work
session, closing the gates and updating the statistics and estimates
for the current job.
•
When the
icon alternates with the
icon, pressing the button
alongside displays a message asking for confirmation of fertilizer flow
calibration.
•
After stopping the machine, press the button corresponding to the
icon to perform calibration or stop spreading by pressing the
button corresponding to the
icon.
The machine must be stationary before performing calibration.
Summary of Contents for KYLO System
Page 54: ...54 54 di 56 AGREX S p A NOTE...
Page 55: ...55 55 di 56 AGREX S p A NOTE...
