44
44 di 56
© AGREX S.p.A.
Computer PFI - Operator Manual
DISPLAY
•
TRACTOR NAME;
•
PROCEDURE RUNNING MESSAGE;
•
PULSES DETECTED;
•
REMAINING STEPS: number of steps remaining to complete
calibration;
•
The START icon (
) appears when no command to start the
procedure has yet been given.
•
The STOP icon (
) ends the calibration procedure;
COMMANDS
• The button alongside the
icon pauses the calibration procedure:
• The button alongside the
icon ends the calibration procedure. If
the procedure is ended prematurely, no calibration data deriving from the
procedure will be stored by the system (a message informs the operator).
• The button under the
icon goes back to the previous menu.
Tractor Settings
DISPLAY
•
NAME: name of selected tractor;
•
SPEED MODE: speed detection mode: simulated, phonic wheel, GPS
speed, ISO 11786.
COMMANDS
•
The button alongside the icon displays a page where you can enter
strings of characters:
For example, in the case of the NAME parameter, by
pressing the buttons alongside the icons containing
letters, you can enter up to 9 characters.
The button alongside the
icon selects
uppercase or lowercase letters or numbers.
The button alongside the
icon cancels the last
character entered.
When held down it cancels the entire string.
Press the button alongside the
icon to enter symbols (+ - %, .) in
the string.
After entering the string of characters, press the button alongside the
icon to confirm and exit the menu or the button corresponding to
the
icon to exit the menu without confirming.
driVE THE
TraCTOr
FOrWard FOr
100M, THEn
STOP and
PrESS THE
STOP BUTTOn
naME
PULSES SPEEd
naME
SPEEd MOdE
PULSES/METErS
Summary of Contents for KYLO System
Page 54: ...54 54 di 56 AGREX S p A NOTE...
Page 55: ...55 55 di 56 AGREX S p A NOTE...
