28
28 di 56
© AGREX S.p.A.
Computer PFI - Operator Manual
6. SETTINGS
DISPLAY
•
Spreading width.
See the Job section in the Main Menu for further details on this setting in job configuration
•
The icons corresponding to the four buttons to adjust right and left gate opening/closing
COMMANDS
•
The buttons alongside each icon modify the position of the right and left gates within a
range of 0 (gate closed) to 100% (gate fully open). The display indicating opening of the
two gates is described in the previous point 4 (HOPPER STATUS).
7. STOP
DISPLAY
•
The STOP icon (
) appears when spreading has begun (see point 8 below).
COMMANDS
•
The button alongside the icon stops spreading and ends the work session, closing the
gates and updating the statistics and estimates for the current job.
8. START/PAUSE
DISPLAY
•
The START icon (
) appears when the spreading command has not yet been given.
•
The PAUSE icon (
) appears when spreading has begun, replacing the “START” icon.
COMMANDS
•
The button alongside the icon starts or pauses the work session, according to the icon
present. When spreading starts, the gates are opened according to the setting (see point
6 above). The pause command closes the gates, but does not update the statistics and
estimates for the current job
9. MENU
COMMANDS
•
The button under the icon displays the main menue.
WARNING
: exiting operating mode to view the main menu interrupts the work
session. When the button corresponding to the
icon is pressed while a
work session is underway, a message is displayed asking the operator to confirm
access to the main menu by pressing the button corresponding to the
icon,
or to cancel by pressing the button corresponding to the
icon.
W
arning
EXiTing THE
OPEraTing
PagE STOPS
SPrEading
FUnCTiOnS. dO
YOU WanT TO
COnTinUE?
Summary of Contents for KYLO System
Page 54: ...54 54 di 56 AGREX S p A NOTE...
Page 55: ...55 55 di 56 AGREX S p A NOTE...
