23
23 di 56
© AGREX S.p.A.
Computer PFI - Operator Manual
•
Tractor speed;
See the Tractor section in Advanced Settings for further details on measuring the speed according to
the tractor
•
Fertilizer in the hopper (defined in the job).
See the Job section in the Main Menu for further details on the fertilizer in job configuration
SECTION 2 (REMAINING)
•
Weight of fertilizer in hopper
For models with weighing system, the weight actually measured by the system is displayed. For
models without weighing system, the weight is determined according to the amount loaded (see
the Fertilizer Filling section in the Main Menu) and the gate settings.
•
Remaining hectares: surface area of land which can be fertilized with the amount of
fertilizer present in the hopper in current working conditions;
•
Remaining metres: linear metres which can be covered, spreading the amount of fertilizer
present in the hopper in current working conditions.
SECTION 3 (SPREAD)
•
Weight of fertilizer spread during the current work session
For models with weighing system, the weight is calculated on the basis of the values measured
by the system itself. For models without weighing system, the weight is determined according
to the amount loaded (see the Fertilizer Filling section in the Main Menu) and the gate settings.
•
Hectares spread: surface area of land fertilized during the current work session;
•
Metres covered: linear metres covered during the current work session.
COMMANDS
•
The buttons alongside switch from one section to another
6. SETTINGS
DISPLAY
•
Spreading width.
See the Job section in the Main Menu for further details on this setting in job configuration
•
Nominal amount of fertilizer to be spread per hectare.
See the Job section in the Main Menu for further details on this setting in job configuration
•
Icons corresponding to the increase, decrease and reset nominal gate position buttons:
, and .
•
When the amount to be spread per hectare is increased or decreased, as well as indicating
the percentage increase or decrease in the HOPPER STATUS section (see point 4 above),
the icon corresponding to the increase or decrease is displayed on a dark background
( or ).
COMMANDS
•
The buttons alongside the and icons increase or decrease respectively the amount of
fertilizer to be spread per hectare with respect to the nominal value set in the job.
Summary of Contents for KYLO System
Page 54: ...54 54 di 56 AGREX S p A NOTE...
Page 55: ...55 55 di 56 AGREX S p A NOTE...
