4
AGM Global Vision
SAFETY SUMMARY
• Read and follow all instructions
• Read all warnings
• Only use the attachments/accessories specified by the manufacturer
• All service must be provided by the manufacturer
WARNING:
Always make sure your firearm is unloaded before you place the equipment on
the firearm. Reconfirm that the chamber is empty if you stop the procedure then
resume later. Safe handling rules should be followed at all times.
WARNING:
NEVER LOOK INTO THE LASER BEAM.
WARNING:
VISIBLE & INVISIBLE LASER RADIATION - AVOID
DIRECT EXPOSURE TO THE BEAM.
• Do not stare into the near-IR beam of either the
laser aimers or the laser illuminator.
• Do not look into the laser beams through magnified
optics such as binoculars or telescopes.
• Do not point the lasers at mirrors or highly reflective surfaces.
• Do not point, direct, or shine the lasers into the eyes of other individuals.
CAUTION:
• Verify that the device is OFF before installing a battery.
• Do not dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature
changes, and electric shocks.
• DO NOT drop or hit the equipment.
• DO NOT force the equipment controls past their stopping points.
• Do not store the equipment with the battery still installed.
• Thoroughly clean and dry each item before replacing them in the storage case.
NOTES:
• Remember to zero your weapon prior to installing the RMSAL or adjusting the
boresight.
AVOID EXPOSURE
INVISIBLE LASER RADIATION IS
EMITTED FROM THESE APERTURES
IR PEAK POWER: 40 mW
IR WAVE LENGTH: 820-850 mm
CLASS IIIb LASER PRODUCT
VIS PEAK POWER: 5 mW
VIS WAVE LENGTH: 620-650 mm
VIS CLASS IIIr LASER PRODUCT
PEAK POWER: 40 mW
WAVE LENGTH: 820-850 mm
CLASS IIIb LASER PRODUCT
D A N G E R