11
RMSAL
USER MANUAL
2.2.2 MOUNTING THE RMSAL
WARNING:
Always make sure your firearm is unloaded before you place the equipment
on the firearm. Reconfirm that the chamber is empty if you stop the procedure
then resume later. Safe handling rules should be followed at all times.
The RMSAL is equipped with an integrated MIL-STD-1913 rail grabber jaw
assembly. The jaws should be fully extended by rotating the knurled camshaft
knob in the fully counterclockwise direction (CCW). Stop turning the cam CCW
when it reaches the end of it travel and you meet resistance.
Wrap the fixed jaw over the weapon rail, center the recoil stop in a recoil groove,
and then tighten the translating jaw by turning the knurled cam shaft knob
clockwise (CW) until it is snug. The knurled cam knob has a slot machined into it
so that a multi-tool, light screwdriver or cartridge can be used for added torque
to tighten the rail grabber sufficiently. Do not over-tighten as damage may occur
to the weapon rail or the RMSAL mount.
FIGURE 2-3. INTEGRAL
RAIL GRABBER ASSEMBLY
FIGURE 2-4. MOUNTED ON
WEAPON RAIL
FIGURE 2-1. RMSAL
BATTERY CAP LOCATION
FIGURE 2-2. RMSAL
BATTERY INSERTION