RATTLER TC
USER MANUAL
21
The left top of the image displays the distance measurement result and the
height of the target.
NOTE:
Go to distance measurement interface, and press
button to view the result
of the previous measuring target.
2.2.11 HOT TRACKING
The device can detect the highest temperature spot in the scene and mark it
on display.
1. Hold
button to show the menu.
2. Select
/
and press
button to enable/disable hot spot mark
(marking the spot of highest temperature).
When the hot spot mark is enabled, the mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
2.2.12 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which have not performed as expected.
Before you start switch the palette to White Hot mode.
1. Hold
button to show the menu.
2. Select
DPC menu item and press
button.
3. Press
,
,
and
buttons to move the cursor to the position
of dead pixel.
6. Hold
button to correct the dead pixel.
2.2.13 CVBS OUTPUT
You can view the video on CVBS monitor, to get a better and clear image, more
convenient to check the detail.
1. Connect the USB-CVBS cable to USB port of thermal clip-on and to monitor’s
CVBS port.
NOTE:
USB-CVBS cable need to be purchase separately.
NOTE:
CVBS Output function doesn’t support hot plug, so please connect the cable
before powering on.
FIGURE 2-11. DISTANCE MEASUREMENT
