RATTLER TC
USER MANUAL
13
3. Enter DCIM>100EZVIZ to view the videos and snapshots.
- Select and copy the videos to PC and play the file with the player.
- Select and copy the snapshots to PC and view the files.
4. Disconnect the device from your PC.
NOTE:
• The device displays images when you connect it to PC. But functions such as
recording, capturing and hot spot are disabled.
• When you connect the device to PC for the first time, it installs the driver
automatically.
2.1.13 IMAGE CALIBRATION
Press
and
buttons together in the view mode to display the Image
Calibration menu.
Use Image Calibration to solve the problem of shooting deviation and to achieve
better accuracy.
For more information on Image Calibration procedures, see Part 2.2.8.
2.1.14 INSTALLING THE CLIP-ON ONTO THE LENS OF A DAY SCOPE
WARNING:
Always make sure your firearm is unloaded before you place the scope on the
firearm. Reconfirm that the chamber is empty if you stop the procedure then
resume later. Safe firearms handling rules should be followed at all times.
Use the optional Day Scope Front Adapter (DSFA) to install the Rattler TC onto
day scope lenses.
ATTENTION:
The day scope front adapters are not recommended for installing the Rattler
TC on firearms with heavy dynamic recoil (.308 Win or stronger).
NOTE:
The Rattler TC cannot be attached to scopes that include focus rings on the
housing of the objective lens.
NOTE:
The adapter must fit with the diameter of the day scope front lens. There
are various optional day scope front adapters available for a wide range of
objective lens diameters.
Install the optional Day Scope Front Adapter to the Rattler as follows (refer to
Figure 2-5):
1. Align the pins of the optional adapter (A) with the bayonet grooves in the
Rattler’s output lens attachment place. This position is marked with a red dot
on the adapter and output lens.
2. Insert the adapter and then turn it clockwise as far as it will go.
3. Rotate the Rattler’s adapter fixing ring (B) clockwise to tighten it on the
adapter thread.
NOTE:
Different models of front adapters may have different designs. Refer to the
user manual for your adapter for correct installation.
