AGL Twister VT Series, User Manual

Page: 43 / 52

Bolt & Nut Tightening torque values
MT [Nm]
Metric Thread
5.8* 8.8* 10.9*
M10 37 49 72
M12
64 85 125
M14
100 135 200
M16 160 210 310
M20
300 425 610
M24
530 730 1050
M27
820 1150 1650
M30
1050 1450 2100
*: Material quality according to DIN ISO 898, MT: Tightening torque value,
d: thread diameter. Hydraulic installations must be tightened with 50 - 70 Nm
torque value.
5.4 Checking the Air Pressure for the
Tires of the Machine
Information.
The ideal pressure value for the tire is indicated on the
information label on the tire. (Printed on the outer surface of the
tire in a circularly embossed way)
Visually inspect the tires while checking the tire pressure. Make sure that there are
no problematic parts on the tires. In case of any damage, contact technical service or
contact the nearest tire service. If the tire is required to be changed according to the
checks performed by the technical service or tire service, replace the tire.
5.5 Checking the Machine's Brake System
In vertical auger feed mixers, brake or no-brake axle can be used according to
customer demand. Machines with brakes also have pneumatic brake or hydraulic brake
options depending on the customer's request. It is recommended to follow the
maintenance recommendations given under this section according to the brake type
on the machine you purchased.
43