AGL Twister VT Series, User Manual

Page: 42 / 52

Wrench Arm Table
Stud Tire Tightening Body Weight
Lever Arm
Length
(
Nuts or Bolts)
Torque F L
(Nm) (Kg) (m)
90 0,31
M18
270 75 0,37
70 0,39
60 0,46
90 0,48
M20
425 75 0,58
70 0,62
60 0,72
Note: These values are valid for the cases where the person who tightens the stud
presses the lever from the F point with his foot and his foot does not touch the
ground.
Tire studs should be tightened gradually and crosswise with the help of a torque
wrench until you get the required tightening torque.
IMPORTANT!
In order not to exceed the permitted tightening torque, the studs should
not be tightened too much. The best result when tightening the tire
bolts is achieved with the help of a torque wrench.
42