8
BATTERY LIDS
Environmental Battery Lid (0607-59-003)
The Environmental Battery Lid (pictured below) is the go-to lid for the FL360 Camera. This lid is designed to
allow the camera to be used for short periods under water at depths of up to 3 meters.
●
Ensure that the gasket on the interior face of the Environmental Lid is in good condition, free from debris,
and contains no nicks or cuts that could negatively affect the seal.
●
The Environmental Lid is held in place by two captive stainless-steel screws and must be securely and
evenly hand-tightened into place using the provided FL360 Battery Compartment Tool.
WARNING:
DO NOT over-tighten the screws, or the camera may be damaged.
Environmental Battery Lid
