13
Step 4
Install the Battery Lid back onto the camera.
Align the Battery Lid with the camera housing (fig 8) and tighten both screws securely and evenly using the
provided FL360 Battery Compartment Tool. Spin the tool until the screws are seated, then turn one additional
full rotation.
CAUTION
: DO NOT over-tighten the screws. The brass inserts in the camera housing could be damaged by
doing so.
Step 5
Press and hold the camera power button for 4 seconds until the multifunction LED turns Blue, indicating the
camera is powering up. The camera can take 30-40 seconds to complete the initial boot sequence. After
finishing booting up, the multifunction LED will indicate the charge level of the battery by flashing three times
in green, yellow, or red. (Green meaning full charge, yellow meaning partial charge, red meaning insufficient
charge. Refer to FL360 LED INDICATOR
MULTI-FUNCTION on page 7 for details.) Once the boot sequence is
completed, the LED will flash Red/Blue to indicate the camera is ready to be paired with the supplied tablet.
Step 6
Power on the tablet and allow it to boot up by pressing and holding the power button until the screen lights
up (this step can be done simultaneously with booting up the FL360 Camera).
Step 7
Tap the FL360 App icon (fig 9) on the tablet to open the FL360 application.
Figure 8: Align the Battery Lid with the camera housing.
Figure 9:
FL360 App Icon
F=
