Agilent Technologies U9391C, Operating And Service Manual

Page: 14 / 39

14 Agilent U9391C/F Comb Generator Operating and Service Manual
2 Installation
Initial Inspection
1 Unpack and inspect the shipping container and its contents
throughly to ensure that nothing was damaged during
shipment. If the shipping container or cushioning material is
damaged, the contents should be checked both mechanically
and electrically.
• Check for mechanical damage such as scratches or dents
• Procedures for checking electrical performance are given
under
“Operator’s Check” on page 32.
2 If the contents are damaged or defective, contact your
nearest Agilent Technologies Service and Support Office.
Refer to the Service and Support information in the front
matter of this manual. Agilent Technologies will arrange for
repair or replacement of the damaged or defective
equipment. Keep the shipping materials for the carrier’s
inspection.
3 If you are returning the instrument under warranty or for
service, repackaging the instrument requires original
shipping containers and material or their equivalents.
Agilent Technologies can provide packaging materials
identical to the original materials. Refer to Service and
Support information in the front matter of this manual for
the Agilent Technologies nearest to you. Attach a tag
indicating the type of service required, return address, model
number and serial number. Mark the container
FRAGILE to
insure careful handling. In any correspondence, refer to the
instrument by model number and serial number.
Kit Contents
The following table lists the item in U9391C/F kit.
Table 2-1 U9391C/F Kit Contents
QUANTITY DESCRIPTION PART NUMBER
1 DC cable assembly - Banana plug 87405-20006
1 USB cable 8121-0506