User’s Guide U3042-90002
35
U3042AE08
Controlling the Test Set with N5230C or N5242A
OK:
Applies the settings and closes the dialog box.
Cancel:
Does not apply changes that were made and closes the dialog box.
NOTE
Test set I/O Commands can be found in
“Test Set I/O Interface Commands” on
page 43
. The Address and Data commands can be entered into the test set I/O
control.
GPIB Control Mode
The GPIB Command Processor feature allows you to send remote commands and data to
the analyzer’s rear-panel GPIB connector and test set I/O connector. More information
regarding the GPIB Command Processor can be found in the Help System menu.
• Overview
• How to Access GPIB Command Processor
• GPIB Command Processor Console
Overview of the GPIB Control
The GPIB Command Processor allows you to send address and data to control an external
test set, without needing to create a remote program. The user is required to manually
input address and data using the GPIB Command Processor Console in the Help menu.
• GPIB Command Processor settings can not be saved or recalled.
• Address and data can be
written
to the GPIB Command Processor and
read
from the
GPIB Command Processor.
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
