Getting Started
Method 2
Use the left and right navigation keys to navigate to the setting that you wish to change.
In the display below, the current setting is selected. Enter a value using the numeric keypad. Then press
Select
.
You can also use the numeric arrow keys to adjust the value up or down. Values become effective when the output is
turned on.
Method 3
Use the
Current
key to select the current entry field. In the display below, the current setting is selected. Enter the
desired setting using the numeric keypad. Then press
Select
.
If you make a mistake, either use the backspace key to delete the number, press Back to back out of the menu, or
press Meter to return to meter mode.
Set the Over-Voltage Protection
Use the front panel menu.
The front panel command menu lets you access most of the power supply’s functions. The actual function controls are
located at the lowest menu level. Briefly:
l
Press the
Menu
key to access the command menu.
l
Press the left and right (
<
,
>
)navigation keys to move across the menu commands.
l
Press the center
Select
key to select a command and move down to the next level in the menu.
l
Press the
Help
key at the lowest menu level to display help information about the function controls.
42
Agilent N8900 Series Operating and Service Guide
Summary of Contents for N8900 series
Page 1: ...Agilent N8900 Series Autoranging System DC Power Supply Operating and Service Guide...
Page 36: ...Multiple Unit Connections Agilent N8900 Series Operating and Service Guide 35...
Page 104: ...Status Tutorial Status Diagram Agilent N8900 Series Operating and Service Guide 103...
Page 119: ......
