Introduction to the Instrument
The numeric entry keys do the following:
The 0 through 9 keys enter numbers.
The (.) key is the decimal point.
The – key is used to enter a minus sign.
The up/down arrow keys increment or decrement voltage or current settings.
They also select letters in alphabetic entry fields.
The E key enters an exponent. Add the value to the right of the E.
The back arrow key deletes digits as it backspaces over them.
The Enter key enters a value. If you exit a field without pressing the Enter
key, the value is ignored.
Rear Panel at a Glance
GPIB
GPIB interface connector
LAN
LAN interface connector
Sharing
Current sharing connections - for parallel operation
+/–Sense
Remote sense connections (if not used, local sensing is internally connected)
–Output; +Output
Negative and positive output terminals
AC input
AC line input
USB
USB interface connector
Analog
Analog connector - for analog control
Master/Slave (Group)
Master/slave connectors - for grouping paralleled units
For electrical shock protection, always connect the AC input earth ground terminal.
Agilent N8900 Series Operating and Service Guide
19
Summary of Contents for N8900 series
Page 1: ...Agilent N8900 Series Autoranging System DC Power Supply Operating and Service Guide...
Page 36: ...Multiple Unit Connections Agilent N8900 Series Operating and Service Guide 35...
Page 104: ...Status Tutorial Status Diagram Agilent N8900 Series Operating and Service Guide 103...
Page 119: ......
