Agilent Technologies E1439, User Manual

Page: 75 / 246

65
Agilent E1439 Programmer's Reference
Functions listed by functional group
clock connectors
age1439_smb_clock_output_get (on page 173)
−
gets which clock to output from the SMB
clock connectors
age1439_sync_clock (on page 178)
−
selects the source of the sync signal
age1439_sync_clock_get (on page 178)
−
gets the source of the sync signal
age1439_sync_direction (on page 179)
−
selects front or rear panel availability of the sync sig-
nal
age1439_sync_direction_get (on page 179)
−
gets the state of front or rear panel clock avail-
ability
age1439_sync_output (on page 180)
−
selects the output for the sync signal
age1439_sync_output_get (on page 180)
−
gets the output for the sync signal
age1439_vcxo (on page 187)
−
selects whether the module should use an internal clock source
age1439_vcxo_get (on page 187)
−
gets whether the internal clock source is on or off
age1439_vxi_clock_output (on page 188)
−
selects which clock drives the VXI clock
age1439_vxi_clock_output_get (on page 188)
−
gets which clock drives the VXI clock
Trigger
age1439_trigger_setup (on page 183)
−
sets all parameters associated with triggering the
beginning of data collection
age1439_trigger_adclevel (on page 183)
−
specifies the threshold for the ADC trigger
age1439_trigger_adclevel_get (on page 183)
−
gets the trigger threshold
age1439_trigger_delay (on page 183)
−
specifies a pre- or post-trigger delay time
age1439_trigger_delay_get (on page 183)
−
gets the trigger delay time
age1439_trigger_delay_actual_get (on page 181)
−
gets the actual delay time from the most
recent trigger event
age1439_trigger_gen (on page 183)
−
determines whether a module can generate a trigger
age1439_trigger_gen_get (on page 183)
−
gets the trigger generation status
age1439_trigger_magdwell (on page 183)
−
specifies the dwell time (in samples) before a
magnitude trigger.
age1439_trigger_magdwell_get (on page 183)
−
gets the magnitude trigger dwell time.
age1439_trigger_maglevel (on page 183)
−
specifies the threshold for a magnitude trigger
age1439_trigger_maglevel_get (on page 183)
−
gets magnitude trigger threshold
age1439_trigger_phase_actual_get (on page 182)
−
returns a representation of the phase
value of the LO at the most recent trigger point
age1439_trigger_slope (on page 183)
−
selects a positive or negative trigger
age1439_trigger_slope_get (on page 183)
−
gets trigger slope
age1439_trigger_type (on page 183)
−
specifies the trigger type
age1439_trigger_type_get (on page 183)
−
gets trigger type
Reading data
age1439_data_scale_get (on page 89)
−
gets data scale factor
age1439_read (on page 159)
−
reads scaled 32-bit float data from FIFO
age1439_read64 (on page 159)
−
reads scaled 64-bit float data from FIFO, specifically for
VEE applications
age1439_read_raw (on page 162)
−
reads raw data from FIFO