Agilent Technologies E1439, User Manual

Page: 74 / 246

64
Agilent E1439 Programmer's Reference
Functions listed by functional group
Identification
age1439_product_id_get (on page 158)
−
returns the module’s product identification string
age1439_options_get (on page 157)
−
returns the module’s options
age1439_serial_number (on page 157)
−
sets the module’s serial number for product repair
purposes
age1439_serial_number_get (on page 157)
−
returns the module’s serial number
age1439_revision_query (on page 169)
−
returns strings that identify the date of the module’s
firmware revision
Interrupts
age1439_attrib_get (on page 74)
−
gets low-level attributes of current I/O library session
age1439_interrupt_setup (on page 146)
−
sets all interrupt parameters
age1439_interrupt_mask_get (on page 146)
−
gets the interrupt event mask
age1439_interrupt_priority_get (on page 146)
−
gets the VME interrupt line
age1439_interrupt_restore (on page 145)
−
restores the interrupt masks to the most recent set-
ting
Measurement control
age1439_meas_control (on page 151)
−
initiates and controls measurements in multi-module
systems
age1439_meas_init (on page 154)
−
initiates a measurement without first checking for valid
hardware setup
age1439_meas_start (on page 155)
−
checks for valid hardware setup and then initiates a mea-
surement
age1439_reset (on page 167)
−
places the module in a known state
age1439_reset_hard (on page 168)
−
resets the module hardware
Timing
age1439_clock_setup (on page 78)
−
sets all timing parameters for commonly used measure-
ment setups
age1439_clock_setup_get (on page 78)
−
gets the current clock setup
age1439_clock_fs (on page 76)
−
provides the frequency of an external sample clock
age1439_clock_fs_get (on page 76)
−
gets the current external sample clock frequency
age1439_adc_clock (on page 72)
−
specifies the ADC clock source
age1439_adc_clock_get (on page 72)
−
gets the ADC clock source
age1439_adc_divider (on page 73)
−
determines which divider is applied to the ADC clock
source
age1439_adc_divider_get (on page 73)
−
gets the module's current clock divider state
age1439_ext_sample_sync (on page 104)
−
enables and disables external sample sync
age1439_ext_sample_sync_get (on page 104)
−
gets the state of external sample sync
age1439_front_panel_clock_input (on page 131)
−
specifies the source for the front panel
clock
age1439_front_panel_clock_input_get (on page 131)
−
gets the front panel clock source
age1439_reference_clock (on page 165)
−
selects the source of the reference clock
age1439_reference_clock_get (on page 165)
−
gets the source of the reference clock
age1439_reference_prescaler (on page 166)
−
selects prescaling of the reference clock
age1439_reference_prescaler_get (on page 166)
−
gets prescaling of the reference clock
age1439_smb_clock_output (on page 173)
−
specifies which clock to output from the SMB