Agilent Technologies E1437A, User Manual, Page: 121 / 214

The following errors are generated by firmware:
0097
HPE1437_BAD_COMMAND “Invalid command code.”
0098 HPE1437_PARM_ERROR “Invalid command parameter.”
0100 HPE1437_CAL_SAVE_ERROR “Error in saving calibration constants.”
0101 HPE1437_DOWNLOAD_ERROR “Error while downloading new firmware.”
0102 HPE1437_DSPCLOCK_TOO_SLOW_ERROR “DSP clock slower than minimum
specification.”
0103 HPE1437_AUTOZERO_ERROR “Autozero error, hardware problem.”
0104 HPE1437_MODE_ERROR “Invalid mode requested.”
0105
HPE1437_START_ERROR “Unable to start measurement.”
0106 HPE1437_SELFTEST_ERROR “Error occurred during self test.”
0107 HPE1437_INTERNAL_ERROR “Internal software error occurred.”
0108 HPE1437_AUTORANGE_ERROR “Error occurred during autoranging, hardware
problem.”
0127 HPE1437_BYTE_SWAP_ERROR “Invalid command code, possible byte order
error.”
E1437A User's Guide
Errors
4-74
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com