Agilent Technologies aurora Duet User Manual Download Page 37

Page: 37 / 236

A Look at

aurora

Duet

Issue 2 - 05/00

3 - 5

LED indicators

LED
Indicator
Array

aurora

Duet

aurora

Duet

There are eleven Light Emitting Diode (LED) status
indicators grouped on the front face of BRI

aurora

Duet

and

twelve on the PRI

aurora

Duet

White text next to an LED relates to Basic Rate
operation on the S interface, orange text relates to Basic
Rate operation on the U interface and blue text relates to
Primary Rate operation.

The LEDs have the following labels, colors and
functions:

Green

shows the unit is operating in TE mode

on the S or U interface.

NT LT Green

shows the unit is operating in NT mode

on the S interface or LT mode on the U
interface.

MON

Green

shows the unit is operating in monitor

mode.

BERT SYNC

Green

shows a BER test is running and pattern

synchronization has been achieved on the data
call in progress.

Summary of Contents for aurora Duet













































































































































































































































Search results

Summary of Contents for aurora Duet

Reviews:

Related manuals for aurora Duet

Brands by name

Popular brands

Agilent Technologies aurora Duet, User Manual

Search results

Summary of Contents for aurora Duet

Reviews:

Related manuals for aurora Duet

Brands by name

Popular brands