Agilent Technologies aurora Duet, User Manual

Page: 88 / 236

5 - 22 428856
aurora
Duet
Basic & Primary Rate ISDN Tester - User Guide
User defined BERT settings
When you set up the BERT
PATTERN
and
TEST LENGTH
as described above, you can choose
USER DEF—
User
Defined. This allows you to enter custom values for these
settings instead of choosing one of the predefined values.
• When you set
PATTERN
to
USER DEF
, Line 11
displays
USER PATTERN
, followed by the current
user defined pattern.
To enter a new pattern comprising two groups of
two hexadecimal digits (i.e. hex numbers in the
range
00 00 to FF FF ), press F3 —
EDIT
. A flashing
cursor appears at the point where you enter the first
digit. Use the keypad to enter digits,
and the
function keys to enter characters as follows:
F1 = A , F2 = B , F3 = C , F4 = D , F5 = E ,
F6 = F .
The LEFT arrow key moves back to the first
character. When you have entered four valid
characters, the display returns to the
PATTERN
setting.
• When you set
TEST LENGTH
to
USER DEF
, Line 12
displays
TEST LENGTH
, followed by the current
user defined test length.
To enter a new length in the form HH:MM:SS
(hours, minutes and seconds), press F3 —
EDIT
. A
flashing cursor appears at the point where you enter
the first digit. Use the keypad to enter the digits.
The LEFT arrow key moves back to the first digit.
When you have entered six valid digits, the display
returns to the
TEST LENGTH
setting.
Function keys
F2
NXT
Displays the next
BERT SETUP
screen
in the sequence.
F3
EDIT
Allows you to edit a user defined value.