Agilent Technologies 8504B, User Manual

Page: 167 / 296

FINAL TRIM SIZE : 7.5 in x 9.0 in
Programming
Instrument Commands
NOOP
The \no operation" command.
Syntax NOOP
NUMG
Triggers a user-specied number of sweeps , and returns to the hold mode .
Syntax NUMG{?|<value>}
Item Description
value 1 to 999.
value 1.0000 to 200, default 1.0
OPC
Operation complete . Reports the completion of the next command received
by setting bit 0 in the event status register , or by replying to the interrogation
form of the command OPC?.
Syntax OPC
OPEP
Lists the key parameters on the display .
Syntax OPEP
Equivalent softkey: 4 COPY 5 ,
N
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
OPERATING PARAMETERS
OUTP A CTI
Outputs the active entry area function value , or the value of the last active
function if the active entry area is o.
Syntax OUTPACTI
OUTPD A T A
Outputs the error corrected data Data format data, 0).
Syntax OUTPDATA
OUTPERRO
Outputs the error message in the error queue Data format Error Number ,
\string" of no more than 50 characters).
Syntax OUTPERRO
4-40