Agilent Technologies 8504B, User Manual

Page: 268 / 296

FINAL TRIM SIZE : 7.5 in x 9.0 in
Error Messages
Message Denitions
MOTOR STOPPED--NEGATIVE LIMIT Negative position limit exceeded. Press
the PRESET key . If error persists contact your Agilent T echnologies Service
Center .
GPIB error number: 97
MOTOR STOPPED--POSITIVE LIMIT P ositive position limit exceeded. Press
the PRESET key . If error persists contact your Agilent T echnologies Service
Center .
GPIB error number: 96
MOTOR TRAJECTORY ERROR Initialization of motor position failed. Press the
PRESET key . If error persists contact your Agilent T echnologies Service
Center .
GPIB error number: 100
NO DISK MEDIUM IN DRIVE No disk was found in the current disk unit. Insert
a disk, or check the disk unit number stored in the reectometer .
GPIB error number: 41
NO FILE(S) FOUND ON DISK No les of the type created by the reectometer
store operation were found on the disk.
GPIB error number: 45
NO MARKER DELTA - SPAN NOT SET The MARKER D -> SP AN softkey function
requires that delta marker mode be turned on, with at least two markers
displayed.
GPIB error number: 15
NO SIGNAL - CHECK BNC CABLE ON REAR PANEL The signal level at the
display processor rear panel A UX INPUT BNC connector is not at the
expected value . This may be due to a faulty BNC cable connection between
the display processor and the lightwave section.
GPIB error number: 109
7-7