Agilent Technologies 8504B, User Manual, Page: 98 / 296

FINAL TRIM SIZE : 7.5 in x 9.0 in
P erforming Measurements
Creating Limit Lines
The limit-line table.
There are three
segment types
There are three types of segments: sloping line , at line , and single point.
Limit line tables can hold up to 22 segments .
Sloping Lines (SL) are drawn as ramps from the previous segment to the
next segment (line or point). Unless terminated by another segment, they
continue to the far right of the screen.
Flat Lines (FL) are drawn as steps from the horizontal position (but not
vertical location) of the previous segment. Unless terminated by another
segment, they continue to the far right of the screen.
Single P oints (SP) are drawn as carets (^ or _ ) at the indicated position when
stand-alone . When used to terminate a line segment, the caret is not drawn.
3-21