15
7890 Series GC Site Preparation Checklist
Issued: 09-Dec-2015, Revision: 1.8
Copyright
2013
Agilent Technologies
Page 15 of 15
Recommended Supplies for GC Maintenance
First time GC users should consider stocking the following supplies to maintain their system. Please
refer to the Agilent Consumables and Supplies Catalog for part numbers and recommended maintenance
periods or visit
http://www.chem.agilent.com/en-US/Promotions/pages/catalog.aspx
Supply
Used for
Inlet supplies
Septa, O-rings, liners, adapter, and seals
Inlet PM kits
Kits with individual parts needed to maintain an inlet.
Column supplies
Nuts, ferrules, adapters, guard columns, retention gaps
Detector supplies
Jets, beads, liners, adapters, cleaning kits
Application supplies
Standards, columns, syringes
Sampler supplies
Vials, caps, electronic crimpers, and syringes.
2B
Autosampler Hardware from Older Systems
If you previously purchased samplers and would like to use these on your new GC, the samplers may
need firmware updates. Sampler models that are compatible include: 7683A and 7693A ALS;
and 7694B and 7697A Headspace Samplers.
This information is subject to change. For more details on software and hardware compatibility, please
contact your sales representative.
3B
Important Customer Web Links
For additional information about our solutions, please visit our web site at:
http://www.agilent.com/home
Customer Education –
http://www.agilent.com/crosslab/university/
Detailed Site Preparation Manual:
http://www.agilent.com/cs/library/usermanuals/public/7890B_SitePrepGuide.pdf
Need supplies? –
HU
http://www.agilent.com/chem/supplies
U
Document part number: G3430-90001
