Agilent Technologies 71501D, User Manual

Page: 117 / 176

3-37
Eye-Diagram Analyzer Reference
Saving to Mass Storage
Initializing (formatting) a memory card
C A U T I O N The following steps erase any files stored on the card.
1 If the memory card is new and needs to be formatted, press:
MENU , page 1 of 2 , States , more 1 of 2 , mass storage , more , FORMAT
2 To use the LIF format, press:
FORMAT as LIF
3 To format as DOS, press:
FORMAT as DOS
To Use an Internal
RAM Disk
1 To invoke Instrument BASIC, press:
USER
If the eye-diagram personality is loaded, press USER again.
2 Enter an
INITIALIZE
statement to create a RAM disk. For example, enter the
following BASIC statement:
INITIALIZE ":MEMORY,0,0",128
3 Select the internal RAM disk by pressing:
MENU , page 1 of 2 , States , more 1 of 2, mass storage, msi: , MEMORY
The RAM disk number is shown on the screen. Use the front-panel knob to
change the RAM disk number.
To Use an GPIB
Disk Drive
1 Connect the GPIB disk drive to the 70004A color display using an GPIB cable.
2 Determine or set the GPIB address of the disk drive. Refer to the disk drive’s
user’s manual for information on determining the disk drive’s address.
3 Set the GPIB address of the disk drive by pressing:
DISPLAY , Mass Storage, msi: , GPIB disk , GPIB ADDRESS
enter the address of the disk drive
This value is between 1 and 7.