Agilent Technologies 34405A, User'S And Service Manual, Page: 61 / 143

34405A User’s and Service Guide 61
Measurement Tutorial 3
Pulse Measurement Error
You can use the DC measurement function to measure a pulse signal and
obtain its relevant average measurement quickly. The formula of the
equivalent DC average of a pulse signal is provided below.
where f(x) is the function representing the signal waveform over a period
of T.
Error may occur when the pulse signal is measured at low voltage range
due to saturation of the multimeter’s analog- to- digital (ADC) rail voltage.
1
T
---
f x
( )
x d
T
∫
Downloaded from www.Manualslib.com manuals search engine