4
Operating the 280-DS
280-DS Operator’s Manual
55
2
Slowly lower the Vessel Module into the vessel until it is seated properly.
Figure 33.
Inserting the Vessel Module
NOTE
For an EaseAlign vessel, ensure that you are lowering it down into
the vessel so it is oriented with the vessel diameter arm going into
the DDM cutout on the EaseAlign centering ring. Once lowered,
turn the Vessel Module so that the arm lever doesn’t contact the
EaseAlign ring posts.
NOTE
For 7025 and 7030 models, evaporation covers must be removed
prior to VM insertion.
For 708-DS, 709-DS, 7000 and 7010 models, it is necessary to
remove the sampling manifold and evaporation covers prior to VM
insertion.
Summary of Contents for 280-DS
