4
Operating the 280-DS
280-DS Operator’s Manual
39
Method Editor Specification Tab
1
Click the
Specification
tab. The Specification page provides the list of
available tests and fields for entering specification limits and or nominal
values. Many default specifications (e.g., USP, FDA, ASTM) are available for
your convenience. The pre-entered options will change and/or will be grayed
out depending on your configuration.
2
Edit the default specifications by clicking on each one and modifying the
values. If any adjustment is made to the pre-loaded specifications, Custom
will display as the Compliance Specification. Place a check in the
n/a
box to
exclude that test from the method.
Figure 17.
Specification Tab
3
You can click
OK
or
Cancel
on any page of this sequence. If you have changed
the method, you will be asked for a reason for the change. After you enter a
reason for the change, the method data, new or modified, is saved to the
database. If you created a new method, the method version will be indicated
by the number 1. If you modified a method, its version will be increased by 1
NOTE
Separate additional RPMs in the Rotational Speed box by using a
comma, space, or semicolon.
Summary of Contents for 280-DS
