AGI WHEATHEART X Series Assembly And Operation Manual Download Page 97

Page: 97 / 126

HEATHEART

- X-S

ERIES

13" A

UGERS

6. O

PERATION

X130-74, X130-84, X130-94

6.3. O

PERATING

ROCEDURES

30787 R2

Figure 6.5 Forward and Reverse PTO Positions (1000 RPM PTO

Reverser)

Before Operating in the Normal Forward Mode:

1. The stub spline on the PTO driveline must be inserted into the Forward spline

coupler (see Figure 6.4 and Figure 6.5) and securely locked into place.

2. Make certain the clean out cover is secured into place on the boot before

operating.

3. The PTO drive control on the tractor must be in the off position before starting

tractor and the PTO hazard area is clear of all bystanders.

Note:

All safety shields must be in place before operating.

Forward
Position

Reverse
Position

Forward
Position

Summary of Contents for WHEATHEART X Series































































































































Search results

Summary of Contents for WHEATHEART X Series

Reviews:

Related manuals for WHEATHEART X Series

Brands by name

Popular brands

AGI WHEATHEART X Series, Assembly And Operation Manual

Search results

Summary of Contents for WHEATHEART X Series

Reviews:

Related manuals for WHEATHEART X Series

Brands by name

Popular brands