AGI WHEATHEART X Series, Assembly And Operation Manual

Page: 81 / 126

W
HEATHEART
- X-S
ERIES
13" A
UGERS
4. T
RANSPORT
X130-74, X130-84, X130-94 4.1. T
RANSPORT
P
ROCEDURE
30787 R2 81
Figure 4.3 Hopper in Transport Position
Important: Intake feed side of hopper must face main auger when in transport (Figure 4.3)
6. Clear all untrained personnel from transport zone.
CAUTION
If auger wheels are partially or fully buried in
snow or grain, failure to clear the area around
the wheels before moving may cause damage
to the auger or result in serious injury.
SAFETY CHAIN
AND HOOK
WINCH CABLE
AND HOOK
WARNING
Beware of overhead obstructions and
electrical wires and devices. X13 augers have
minimum clearances from 13'6" to 14'6"
(4.11 m to 4.42 m).
NOTICE
Empty the auger before transporting. Transporting a full
auger will place excessive loads on the tube assembly,
frame, axle assembly, hitch, and towing unit.
If auger wheels are partially or fully buried in snow or grain,
do not attempt to move auger until snow or grain has been
cleared away from auger wheels.