AGFEO AS 1x, Manual

Page: 82 / 228

1 - 52
System Telephones
ST 25 DECT 30 ST 30
Least Cost Routing (LCR)
Notes
You can still select which network provider is used for your call despite LCR being enabled.
- Simply prefix your number with the network access code
- You can also select the network provider with the function button CALL BY CALL on a
system phone. (see also Network access code -Call by Call ).
The network access code for the network operator is only stored in the last number redial
memory if this has been dialled manually before.
Important! Not all ISDN features described may be available. Please check with your network
provider for availability.
/
Press the LCR function button to switch
this feature on or off for your extension.
Switching Least Cost Routing on/off
/
A
z
This feature will make use of various network providers offering cheap call rates. Calls are
routed depending on the STD Code dialled which is also dependent on the time and day of the
week. If it is not possible to connect to the relevant provider after a preset number of
attempts then the system will try to route the call via a preset alternative provider. (Fallback)
The access code of the relevant provider will be prefixed by the system to the number dialled.
The Least Cost Routing can cater for up to 8 network providers in 8 time slots depending on
time of day and day of week. Least Cost Routing can be programmed with TK-LCR on your
PC. Least Cost Routing can be switched on or off on your extension.