AGFEO AS 1x, Manual

Page: 173 / 228

2 - 43
Analogue and
ISDN-Phones
Notes
A diversion will not be carried out if the call to be diverted has already being once diverted.
Diversions to an extension were Do Not Disturb is set are not possible.
Returned calls, Alarm and Appointment Calls cannot be diverted.
Diversion to external subscriber:
A line must be available for diversions to an outside number.
The diverting extension must have the correct line access level set in order to establish a
diversion to an outside number. You will have to pay call charges for diverted calls.
Call Forwarding
Diversion via the public switched telephone network. Call forwarding can only be setup if this
feature has been ordered from your telephone exchange.If call forward is carried out on a
Point to Point (PTP) connection then the entire line including all DDI‘s are forwarded. To
forward individual DDI numbers via the telephone exchange and without busying your second
B Channel you must have the feature PARTIAL RE-ROUTING enabled in the program of the
telephone system.
Using this feature on a Point to Multipoint (PTMP) then partial re-routed does not need to be
set as each individual MSN can be diverted. When using a call forwarding button on your
phone you can select the line to be forwarded.
Call forwarding can also be programmed remotely from any telephone who can dial your
system. For instructions on how to activate call forwarding remotely, please refer to your
user manual for analogue extensions under the heading ‘Diverting to....‘ A destination
telephone number must have been programmed if you want to switch on or off call
forwarding via a feature button. The following types of call forward are available.
-Forward all calls
-Forward on busy
-Forward on no reply