manualshive.com logo in svg

AGFEO AS 1x, Manual

Share
Download
AGFEO AS 1x Manual Download Page 207

A - 3

Call list

The call list stores external calls with transmitted phone number with phone number and
date/time if the call cannot be answered. On the system telephones and many ISDN
telephones the call list can be called at any time and the subscriber called directly by
pushing a key. Any phone number can be dialled by a mouseclick from the call list of TK-
Phone (part of TK-Soft).

The internal phone numbers of the terminal that are rung in the event of an external call
are defined in a call variant.  Different call variants can be defined for the day or the night
service. Call variant 1 (day time service) and call variant 2 (night service) can be switched
over at any time from any telephone.

Call variant

Camp on tones during a telephone call signal that another subscriber is calling. The first
caller can be held in the line while you ask the second caller what he wants. This means no
calls are missed. Anyone who considers this as a disturbance can switch it off with the
camp on protection. The second caller either gets the busy tone or lands on an answering
machine for example.

Camp on protection - reject camp on

Charging shell switch

With the charging shell switch it is possible to switch functions in the telecommunications
system by inserting and removing the DECT 30 in and from the charging shell. The
switching can be done for any subscribers. For example the answering machine can be
switched on or the call variant changed by removing the DECT 30. The functions for the
charging shell switch are set up with the PC using TK-Soft (DECT options).

Glossary

Call forwarding - ISDN call forwarding

With this ISDN service feature, calls for your ISDN connection can be forwarded worldwide
to any other connection. You enter the destination number in your ISDN
telecommunications system and activate the call forwarding in your public exchange. The
exchange then re-routes all calls without the telecommunications system noticing (see call
diversion). With call forwarding on the system connection you always forward the whole
connection. On a multipoint connection you can divert every phone number (MSN)
individually to a respective different destination. Call forwarding is possible in the variations
permanent, when no answer and when busy. The call forwarding feature can only be used
by special agreement with your network provider.

Summary of Contents for AS 1x





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands