AGFEO AS 1x, Manual

Page: 177 / 228

2 - 47
Analogue and
ISDN-Phones
Telephone Answering Machine (TAM)
CLIP - display caller’s phone
number
On analogue telephones which support the CLIP feature, you will see who is calling before
you lift the receiver. For external calls, the caller’s number and the date/time are displayed.
The name is displayed additionally for internal calls.
You have to set whether or not you want to use the CLIP function on the telephone.
Switching on CLIP
h P S59PZ Z Q P ª
TAM activation: Lift receiver
Remote activation
acknowledgement
tone
2=Answer on
1=Announcement only on
0=off
select TAM: replace
receiver
h P S7892 P Z Q P ª
enter digit: Lift receiver enter code for CLIP function acknowledgement
tone
1 = on
0 = off
replace receiver
An AGFEO ST 30 system phone can be expanded with a ‘A Modul 30‘ telephone answering
machine. The answering machine can be switched on or off from any extension or remotely
from any telephone number. The module can be recorded with two messages, one for nor-
mal operation and one for announcement only mode.
If the ST 30 is programmed with a primary and secondary extension number then the
answering machine can answer each number with a different message in turn. (Like having
two answering machines) The two extension numbers will work totally independent from
each other and each machine can be switched on or off as required.
Switch on / off (from another
extension)
extension
number of
the TAM