AGFEO AS 1x, Manual

Page: 150 / 228

2 - 20
Analogue and
ISDN-Phones
You can put a call on hold in order to make an enquiry call via the ISDN exchange, however this
is only possible if your line is a Point-To-Multipoint connection. Note: This feature may not be
available from your network provider. (not available from network providers in the UK)
This feature would allow you to make an enquiry call to another outside number even though no
line (B Channel) is available. The call is put on hold in the exchange therefore releasing a line to
be used to set up another call. You then can alternate between the calls by using the SPLIT
button.
Place a Call on Hold (may not be available
from network providers)
A call cannot be placed on hold in the exchange if you hear the error tone. You are connected
back to the other call by entering
r0
.
When you replace your receiver, you will clear both calls, the current and the holding one.
Call charges are incurred for the current call and for the one on hold.
Notes
To place a Call on Hold
T P r P S 60 Q P Z P
T P r P S 60 T P
Conduct external
call
Conduct enquiry:
enquiry First external call on
hold
External dial tone Enter external
phone number
enquiry Return to first -
external call Continue first -
external call