The User Interface
The digitizer has two operation modes:
• the
operator mode
for basic operation,
• the
service mode
reserved for trained service personnel.
The functions of the operator mode are described in this manual.
The digitizer interfaces with the user via:
• a touch panel which enables access to all functions,
• a status indicator.
1
4
2
3
1.
Status indicator.
2.
Touch panel.
3.
On/Off switch (main switch).
4.
Ethernet connection (located at the rear side).
Figure 4: User interface
Status Indicator
The indicator informs the user by light signals about the status of the digitizer
(e.g. image plate erasing cycle progress, operational indications such as warm
up,...). It is positioned at the front of the digitizer, so that it is visible from a
distance.
56
| DX-G, DX-M | Getting started
2321G EN 20181126 1428