4.
Pull out the cleaning brush until you feel the stop position and put it back
in the digitizer.
Repeat this action 5 times.
5.
Close the right side cover.
To close the right side cover, proceed as follows:
• Close the cover.
• Turn the latch through 90° counterclockwise and close the eye of the
latching.
In case of a mobile device, unlock the upper right lock.
6.
Plug the power plug into the socket.
Replacing the air-filter element
Note
:
It is advised to replace the air-filter element at least once a year.
To change the air-filter element:
1.
Switch off the digitizer.
2.
Remove the power plug from the socket.
3.
Open the right side cover of the digitizer.
Open the eye of the latching and turn the latch through 90° clockwise.
In case of a mobile device, lock the upper right lock before opening the
side cover.
DX-G, DX-M | Introduction |
41
2321G EN 20181126 1428