8.
Insert the tool in the opening and turn the screw counterclockwise, until
the digitizer is lifted up approximately 1,5-2 cm, until you encounter
resistance.
1,5 - 2 cm
0.59 - 0.78 inch
The digitizer is ready to be moved to another location.
9.
Move the digitizer to the desired location.
WARNING:
Observe great care when moving the digitizer to the desired
location. So please select a path free from inclinations and
thresholds to prevent the digitizer from shocks during
movement.
10.
Once on the desired site, turn the screw clockwise until the digitizer is
fixed on the ground and you encounter resistance.
Now the digitizer is ready for operation.
WARNING:
Operating the digitizer in a not-fixed condition may result in
image artefacts.
22
| DX-G, DX-M | Introduction
2321G EN 20181126 1428