AGFA DX-G User Manual Download Page 39 | Manualshive

Page: 39 / 96

AGFA DX-G User Manual Download Page 39

WARNING:

Make sure no liquid gets in the device.

CAUTION:

Do not open the digitizer for cleaning. No components inside

the digitizer require cleaning by the user.

4.

Plug the power plug into the socket.
Switch on the UPS, if installed.

Cleaning the touch panel

To clean the touch panel:

1.

Switch off the digitizer.

2.

Remove the power plug from the socket.
Switch off the UPS, if installed.

3.

Wipe the touch panel of the digitizer with a clean, soft, damp cloth. Use a

commercially available screen cleaner for monitors to clean the touch

panel.

WARNING:

Do not pour liquid directly on the touch panel.

4.

Plug the power plug into the socket.
Switch on the UPS, if installed.

Cleaning the optical unit

The only maintenance action which you must perform is checking the image
quality. Refer to the User Manual of the NX Software.

WARNING:

Dust in the optical unit on the light collecting mirror can create
stripes parallel to the image plate movement within the
digitizer. When you recognize this type of artefact, when using
the digitizer, clean the optical unit using the cleaning brush.

DX-G, DX-M | Introduction |

39

2321G EN 20181126 1428

«
...
37
38
39
40
41
...
»

Summary of Contents for DX-G

































































































Reviews:

No comments