AGFA ANAPURNA MV, Technical Manual

Page: 38 / 215

38
ABSOLUTELY KEEPING
ABSOLUTELY KEEPING
1. Vacuum pressure checking: If the power of printer is on, the supply of compressed
air should be available. (The value required for controlling each part should be
aligned within the values written in the Sticker mentioned on each part.)
2. While the printer is not in use, clean the head and install the capping device.
Æ
Protect the head by cleaning head solution. (once or more a day)
Æ
If machine is on, if print in operation more than 1 hr and if run for 20
㎡
/h,
the pursing process will help the head nozzle to protect.
Æ
If power is off in operating, the solution must be filled in within a short time in
order to protect the Head.
Æ
If power is OFF, should do capping after cleaning the head solution.
3. Before turning on the power of printer, should check ON status of COMPRESSOR
and then turn on the power. On the contrary, when the power of printer is turned
off, after cleaning the head and completing the capping, then turn off the power
of COMPRESSOR.