AGFA ANAPURNA MV, Technical Manual

Page: 12 / 215

12
STEP 5. (1) When powered on firstly, the headbase will be in very high position for
HOME CHECKING by lifting up headbase.
(2) After being sucked and fixed by putting a Media on and turn
on VACUUM, then press CALIB. Key.
(3) By selecting F6 HEAD GAP, the height of head can be set less than
2mm from Media.
(The closer the head is set to the media, the better the quality will be)
Æ
When completing the adjustment of head height, move carriage to HOME Position.
STEP 6. Solution cleaning
1) Make the 6 mini values turn to S direction.
2) Also make solution valve turn to S direction.
3) Discharge the solution toward the head by pressing purge button.
How to Install IV
How to Install IV
-
-
4 (HEAD CLEANING & INK SUPPLY)
4 (HEAD CLEANING & INK SUPPLY)
C M Y LC LM V1 K
Solution Direction
Control Valve INK DIRECTION
V2 S